Use https for links.

I thought I went over all these several years ago already, but apparently not or maybe back then not all websites were HTTPS-ready. Now they mostly are, except for maybe one or two.
7 months ago · 0109548149
37 changed files with 81 additions and 83 deletions
--- a/doc/building.dox
+++ b/doc/building.dox
@ -603,13 +603,13 @@ going to build any of the @ref example-index "examples", you'll need it.
    Available only on @ref CORRADE_TARGET_EMSCRIPTEN "Emscripten".
 -   `MAGNUM_WITH_GLFWAPPLICATION` --- Build the
    @ref Platform::GlfwApplication "GlfwApplication" library. Depends on
-    [GLFW](http://glfw.org).
+    [GLFW](https://www.glfw.org).
 -   `MAGNUM_WITH_GLXAPPLICATION` --- Build the
    @ref Platform::GlxApplication "GlxApplication" library. Depends on **X11**.
    Requires `MAGNUM_TARGET_GL` to be enabled.
 -   `MAGNUM_WITH_SDL2APPLICATION` --- Build the
    @ref Platform::Sdl2Application "Sdl2Application" library. Depends on
-    [SDL2](http://www.libsdl.org).
+    [SDL2](https://www.libsdl.org).
 -   `MAGNUM_WITH_XEGLAPPLICATION` --- Build the
    @ref Platform::XEglApplication "XEglApplication" library. Enables also
    building of the @ref GL library.
@ -909,7 +909,7 @@ information.

@section building-doc Building documentation

-The documentation is generated using [Doxygen](http://doxygen.org) with the
+The documentation is generated using [Doxygen](https://doxygen.org) with the
 [m.css Doxygen theme](https://mcss.mosra.cz/documentation/doxygen/) and
 additionally uses **LaTeX** for math formulas. Use `doc/conf.py` for a local
 build, the `doc/conf-public.py` is meant for the publicly available
@ -1070,8 +1070,7 @@ to make it available to depending projects.

@subsection building-cross-emscripten Cross-compiling for Emscripten

-You will need [Emscripten](http://kripken.github.io/emscripten-site/) installed
-and configured and
+You will need [Emscripten](https://emscripten.org) installed and configured and
@ref building-corrade-cross-emscripten "Corrade built for Emscripten". The
 toolchains require CMake 3.7 or newer to properly set compiler and linker
 flags. If you are on Windows, [this blog post](https://blog.squareys.de/magnum-emscripten-on-windows/)
--- a/doc/changelog-old.dox
+++ b/doc/changelog-old.dox
@ -1187,7 +1187,7 @@ a high-level overview.

@subsection changelog-2018-02-docs Documentation

-   New documentation theme powered by [m.css](http://mcss.mosra.cz) and
+-   New documentation theme powered by [m.css](https://mcss.mosra.cz) and
    related massive updates of *everything* (see
    [mosra/magnum#113](https://github.com/mosra/magnum/issues/113))
 -   Explicit list of extensions that are available in WebGL builds
--- a/doc/conf.py
+++ b/doc/conf.py
@ -30,7 +30,7 @@ LINKS_NAVBAR2 = [
    ("<a href=\"../../../../magnum-bindings/build/doc/python/index.html\">Python API</a>", [])
 ]

-FINE_PRINT = """<p>Magnum docs. Part of the <a href="https://magnum.graphics/">Magnum project</a>, copyright © <a href="http://mosra.cz/">Vladimír Vondruš</a> and <a href="credits-contributors.html">contributors</a>, 2010&ndash;2025.<br />Generated by <a href="https://doxygen.org/">Doxygen</a> {doxygen_version} and <a href="https://mcss.mosra.cz/">m.css</a>. Contact the team via <a href="https://github.com/mosra/magnum">GitHub</a>, <a href="https://gitter.im/mosra/magnum">Gitter</a>, <a href="mailto:info@magnum.graphics">e-mail</a> or <a href="https://twitter.com/czmosra">Twitter</a>.</p>"""
+FINE_PRINT = """<p>Magnum docs. Part of the <a href="https://magnum.graphics/">Magnum project</a>, copyright © <a href="https://mosra.cz/">Vladimír Vondruš</a> and <a href="credits-contributors.html">contributors</a>, 2010&ndash;2025.<br />Generated by <a href="https://doxygen.org/">Doxygen</a> {doxygen_version} and <a href="https://mcss.mosra.cz/">m.css</a>. Contact the team via <a href="https://github.com/mosra/magnum">GitHub</a>, <a href="https://gitter.im/mosra/magnum">Gitter</a>, <a href="mailto:info@magnum.graphics">e-mail</a> or <a href="https://twitter.com/czmosra">Twitter</a>.</p>"""

 SEARCH_HELP = """<p class="m-noindent">Search for symbols, directories, files, pages, OpenGL, GLSL, Vulkan and OpenAL APIs. You can omit any prefix from the symbol or file path; adding a <code>:</code> or <code>/</code> suffix lists all members of given symbol or directory.</p> <p class="m-noindent">Use <span class="m-label m-dim">&darr;</span> / <span class="m-label m-dim">&uarr;</span> to navigate through the list, <span class="m-label m-dim">Enter</span> to go. <span class="m-label m-dim">Tab</span> autocompletes common prefix, you can copy a link to the result using <span class="m-label m-dim">⌘</span> <span class="m-label m-dim">L</span> while <span class="m-label m-dim">⌘</span> <span class="m-label m-dim">M</span> produces a Markdown link.</p>"""

--- a/doc/developers.dox
+++ b/doc/developers.dox
@ -394,8 +394,8 @@ in inverse.
 7.  Mention the new functionality in `doc/changelog.dox` (and similar files in
    other repos)
 8.  @ref building-doc "Build documentation":
-    -   run [doxygen.py](http://mcss.mosra.cz/doxygen/) on `Doxyfile-mcss`
-        and verify there are no new warnings
+    -   run [doxygen.py](https://mcss.mosra.cz/documentation/doxygen/) on
+        `doc/conf.py` and verify there are no new warnings
    -   eyeball the relevant docs and fix suspicious things
 9.  Build a coverage build (`package/archlinux/PKGBUILD-coverage`), or abuse
    the CI for that later
@ -417,8 +417,8 @@ in inverse --- but usually @ref developers-deprecation "deprecate first".
 5.  Mention the new functionality in `doc/changelog.dox` (and similar files in
    other repos)
 6.  @ref building-doc "Build documentation":
-    -   run [doxygen.py](http://mcss.mosra.cz/doxygen/) on `Doxyfile-mcss`
-        and verify there are no new warnings
+    -   run [doxygen.py](https://mcss.mosra.cz/documentation/doxygen/) on
+        `doc/conf.py` and verify there are no new warnings
    -   eyeball the relevant docs and fix suspicious things
 7.  Build a coverage build (`package/archlinux/PKGBUILD-coverage`), or abuse
    the CI for that later
@ -443,8 +443,8 @@ in inverse --- but usually @ref developers-deprecation "deprecate first".
 6.  Mention the new page in `doc/changelog.dox` (and similar files in other
    repos)
 7.  @ref building-doc "Build documentation":
-    -   run [doxygen.py](http://mcss.mosra.cz/doxygen/) on `Doxyfile-mcss`
-        and verify there are no new warnings
+    -   run [doxygen.py](https://mcss.mosra.cz/documentation/doxygen/) on
+        `doc/conf.py` and verify there are no new warnings
    -   eyeball the relevant docs and fix suspicious things
 8.  Push to `master`

@ -488,8 +488,8 @@ in inverse --- but usually @ref developers-deprecation "deprecate first".
 8.  Mention the deprecated API in the deprecation section of `doc/changelog.dox`
    (and similar files in other repos)
 9.  @ref building-doc "Build documentation":
-    -   run [doxygen.py](http://mcss.mosra.cz/doxygen/) on `Doxyfile-mcss`
-        and verify there are no new warnings
+    -   run [doxygen.py](https://mcss.mosra.cz/documentation/doxygen/) on
+        `doc/conf.py` and verify there are no new warnings
    -   eyeball the relevant docs and fix suspicious things
 10. Push to a temporary branch (e.g., `next`)
 11. Iterate until the CIs are green
@ -563,9 +563,9 @@ in inverse --- but usually @ref developers-deprecation "deprecate first".
 3.  Mention the removed API in the compatibility section of `doc/changelog.dox`
    (or similar files in other repos)
 4.  @ref building-doc "Build documentation":
-    -   run [doxygen.py](http://mcss.mosra.cz/doxygen/) on `Doxyfile-mcss`
-        and verify there are no new warnings --- sometimes it happens that a
-        deprecated API is still being referenced
+    -   run [doxygen.py](https://mcss.mosra.cz/documentation/doxygen/) on
+        `doc/conf.py` and verify there are no new warnings --- sometimes it
+        happens that a deprecated API is still being referenced
 5.  Push to a temporary branch (e.g., `next`)
 6.  Iterate until the CIs are green
 7.  Merge to `master`
@ -1157,8 +1157,8 @@ inverse.
 1.  (Optionally) remove `build/doc-public` to get rid of stale files
 2.  Verify there are no untracked files, modifications or branches different
    than `master` checked out that could mess up the docs
-3.  Run [doxygen.py](http://mcss.mosra.cz/doxygen/) on `Doxyfile-public`,
-    look for suspicious warnings
+3.  Run [doxygen.py](https://mcss.mosra.cz/documentation/doxygen/) on
+    `doc/conf-public.py`, look for suspicious warnings
 4.  Upload contents of `build/doc-public/html/` to `doc/magnum-new/` and remove
    `doc/magnum-old/` if any
 5.  Once the upload is finished, rename `doc/magnum/` to `doc/magnum-old/` and
@ -1178,8 +1178,8 @@ inverse.
 6.  Update `doc/changelog.dox` (and similar files in other repos), if not
    already done
 7.  @ref building-doc "Build documentation:
-    -   run [doxygen.py](http://mcss.mosra.cz/doxygen/) on `Doxyfile-mcss`
-        and verify there are no new warnings
+    -   run [doxygen.py](https://mcss.mosra.cz/documentation/doxygen/) on
+        `doc/conf.py` and verify there are no new warnings
    -   eyeball the relevant docs and fix suspicious things
 8.  Push to a temporary branch (e.g., `next`)
 9.  Iterate until the CIs are green
--- a/doc/getting-started.dox
+++ b/doc/getting-started.dox
@ -83,7 +83,7 @@ add_subdirectory(magnum EXCLUDE_FROM_ALL)
 add_subdirectory(src)
@endcode

-The last missing piece before you can continue is the [SDL](http://libsdl.org/)
+The last missing piece before you can continue is the [SDL](https://libsdl.org)
 library --- the bootstrap project (and most examples) use it to do window
 management and event handling. If you are on Linux or macOS, you can get it
 easily from your package manager:
--- a/doc/method-chaining.dox
+++ b/doc/method-chaining.dox
@ -30,8 +30,8 @@ namespace Magnum {

@m_footernavigation

-Method chaining ([Wikipedia](http://en.wikipedia.org/wiki/Method_chaining)) is a
-feature which allows you to chain method calls one after another without
+Method chaining ([Wikipedia](https://en.wikipedia.org/wiki/Method_chaining)) is
+a feature which allows you to chain method calls one after another without
 repeatedly specifying variable the method is called on. Its primary goal is to
 reduce unnecessary repeated names, improving code readability.

--- a/doc/opengl-wrapping.dox
+++ b/doc/opengl-wrapping.dox
@ -120,7 +120,7 @@ previous values --- it would involve impractically large amount of queries and
 state switches with serious performance impact. It's thus expected that
 third-party code either does no state tracking or provides similar means to
 reset their state tracker (for example Qt has
-[QQuickWindow::resetOpenGLState()](http://doc.qt.io/qt-5/qquickwindow.html#resetOpenGLState)
+[QQuickWindow::resetOpenGLState()](https://doc.qt.io/archives/qt-5.15/qquickwindow.html#resetOpenGLState)
 that's advised to call before giving the control back to Qt).

@section opengl-wrapping-dsa Extension-dependent functionality
--- a/doc/platforms-android.dox
+++ b/doc/platforms-android.dox
@ -182,7 +182,7 @@ different version.
 The @cb{.xml} <uses-sdk android:minSdkVersion="4" android:targetSdkVersion="11" /> @ce
 line requests the minimal and target Android SDK version. Setting the version
 lower than this (or accidentally omitting this element) will enable the
-[Screen Compatibility Mode](http://www.androiddocs.com/guide/practices/screen-compat-mode.html),
+[Screen Compatibility Mode](https://developer.android.com/guide/topics/manifest/supports-screens-element#compat-mode),
 which doesn't report events in coordinates that match underlying framebuffer
 pixel size. That is not supported by @ref Platform::AndroidApplication since
 there's [no reliable way](https://stackoverflow.com/q/17481341) to get the
--- a/doc/platforms-html5.dox
+++ b/doc/platforms-html5.dox
@ -38,8 +38,7 @@ namespace Magnum {
@todoc static plugins

 The following guide explains basic workflow of using
-[Emscripten](http://kripken.github.io/emscripten-site/) for deploying HTML5
-apps using WebGL.
+[Emscripten](https://emscripten.org) for deploying HTML5 apps using WebGL.

 At the very least you need to have Emscripten installed. Running console
 applications requires Node.js, running browser apps require a webserver that's
@ -559,8 +558,8 @@ See @ref GL-Buffer-webgl-restrictions "GL::Buffer",
 documentation for more information. The corresponding sections in official
 WebGL specification provide even more detail:

-   [Differences Between WebGL and OpenGL ES 2.0](http://www.khronos.org/registry/webgl/specs/latest/1.0/#6)
-   [Differences Between WebGL and OpenGL ES 3.0](https://www.khronos.org/registry/webgl/specs/latest/2.0/#5)
+-   [Differences Between WebGL and OpenGL ES 2.0](https://registry.khronos.org/webgl/specs/latest/1.0/#6)
+-   [Differences Between WebGL and OpenGL ES 3.0](https://registry.khronos.org/webgl/specs/latest/2.0/#5)

@subsection platforms-html5-webgl-timer-queries Timer queries not available in the browser

--- a/doc/platforms-vk.dox
+++ b/doc/platforms-vk.dox
@ -116,7 +116,7 @@ Qualcomm best practices:

 Various useful links:

-   [Yet another blog explaining Vulkan synchronization](http://themaister.net/blog/2019/08/14/yet-another-blog-explaining-vulkan-synchronization/)
+-   [Yet another blog explaining Vulkan synchronization](https://themaister.net/blog/2019/08/14/yet-another-blog-explaining-vulkan-synchronization/)
 -   [Writing an efficient Vulkan renderer](https://zeux.io/2020/02/27/writing-an-efficient-vulkan-renderer/)
 -   [Custom memory allocators](https://rastergrid.com/blog/sw-eng/2021/03/custom-memory-allocators/)

--- a/modules/FindEGL.cmake
+++ b/modules/FindEGL.cmake
@ -69,7 +69,7 @@ find_package_handle_standard_args(EGL DEFAULT_MSG
 if(NOT TARGET EGL::EGL)
    # Work around BUGGY framework support on macOS. Do this also in case of
    # Emscripten, since there we don't have a location either.
-    # http://public.kitware.com/pipermail/cmake/2016-April/063179.html
+    # https://cmake.org/pipermail/cmake/2016-April/063179.html
    if((APPLE AND EGL_LIBRARY MATCHES "\\.framework$") OR CORRADE_TARGET_EMSCRIPTEN)
        add_library(EGL::EGL INTERFACE IMPORTED)
        set_property(TARGET EGL::EGL APPEND PROPERTY
--- a/modules/FindOpenAL.cmake
+++ b/modules/FindOpenAL.cmake
@ -166,7 +166,7 @@ find_package_handle_standard_args(OpenAL DEFAULT_MSG
 if(NOT TARGET OpenAL::OpenAL)
    # Work around BUGGY framework support on macOS. Do this also in case of
    # Emscripten, since there we don't have a location either.
-    # http://public.kitware.com/pipermail/cmake/2016-April/063179.html
+    # https://cmake.org/pipermail/cmake/2016-April/063179.html
    if((APPLE AND OPENAL_LIBRARY MATCHES "\\.framework$") OR CORRADE_TARGET_EMSCRIPTEN)
        add_library(OpenAL::OpenAL INTERFACE IMPORTED)
        set_property(TARGET OpenAL::OpenAL APPEND PROPERTY
--- a/modules/FindOpenGLES2.cmake
+++ b/modules/FindOpenGLES2.cmake
@ -64,7 +64,7 @@ find_package_handle_standard_args(OpenGLES2 DEFAULT_MSG
 if(NOT TARGET OpenGLES2::OpenGLES2)
    # Work around BUGGY framework support on macOS. Do this also in case of
    # Emscripten, since there we don't have a location either.
-    # http://public.kitware.com/pipermail/cmake/2016-April/063179.html
+    # https://cmake.org/pipermail/cmake/2016-April/063179.html
    if((CORRADE_TARGET_APPLE AND OPENGLES2_LIBRARY MATCHES "\\.framework$") OR CORRADE_TARGET_EMSCRIPTEN)
        add_library(OpenGLES2::OpenGLES2 INTERFACE IMPORTED)
        set_property(TARGET OpenGLES2::OpenGLES2 APPEND PROPERTY
--- a/modules/FindOpenGLES3.cmake
+++ b/modules/FindOpenGLES3.cmake
@ -69,7 +69,7 @@ find_package_handle_standard_args("OpenGLES3" DEFAULT_MSG
 if(NOT TARGET OpenGLES3::OpenGLES3)
    # Work around BUGGY framework support on macOS. Do this also in case of
    # Emscripten, since there we don't have a location either.
-    # http://public.kitware.com/pipermail/cmake/2016-April/063179.html
+    # https://cmake.org/pipermail/cmake/2016-April/063179.html
    if((CORRADE_TARGET_APPLE AND OPENGLES3_LIBRARY MATCHES "\\.framework$") OR CORRADE_TARGET_EMSCRIPTEN)
        add_library(OpenGLES3::OpenGLES3 INTERFACE IMPORTED)
        set_property(TARGET OpenGLES3::OpenGLES3 APPEND PROPERTY
--- a/package/ci/appveyor-cache-reset.txt
+++ b/package/ci/appveyor-cache-reset.txt
@ -1,3 +1,3 @@
 # Increase this number every time you want to reset AppVeyor cache.
-# http://help.appveyor.com/discussions/questions/1310-delete-cache
+# https://help.appveyor.com/discussions/questions/1310-delete-cache
 0
--- a/src/Magnum/Animation/Easing.h
+++ b/src/Magnum/Animation/Easing.h
@ -295,7 +295,7 @@ point as needed:
@section Animation-Easing-references References

 Functions follow the common naming from Robert Penner's Easing functions,
-http://robertpenner.com/easing/. Implementation based on and inspired by
+https://robertpenner.com/easing/. Implementation based on and inspired by
 https://easings.net/,
 [https://github.com/warrenm/AHEasing](https://github.com/warrenm/AHEasing/blob/master/AHEasing/easing.c),
 [https://github.com/bkaradzic/bx](https://github.com/bkaradzic/bx/blob/master/include/bx/inline/easing.inl),
--- a/src/Magnum/DebugTools/ColorMap.h
+++ b/src/Magnum/DebugTools/ColorMap.h
@ -178,7 +178,7 @@ MAGNUM_DEBUGTOOLS_EXPORT Containers::StaticArrayView<256, const Vector3ub> turbo

@thirdparty Created by [Stéfan van der Walt](https://github.com/stefanv) and
    [Nathaniel Smith](https://github.com/njsmith) for the matplotlib library
-    ([source](http://bids.github.io/colormap/)), released under a
+    ([source](https://bids.github.io/colormap/)), released under a
    @m_class{m-label m-primary} **CC0** license
    ([choosealicense.com](https://choosealicense.com/licenses/cc0-1.0/)).
 */
@ -194,7 +194,7 @@ MAGNUM_DEBUGTOOLS_EXPORT Containers::StaticArrayView<256, const Vector3ub> magma

@thirdparty Created by [Stéfan van der Walt](https://github.com/stefanv) and
    [Nathaniel Smith](https://github.com/njsmith) for the matplotlib library
-    ([source](http://bids.github.io/colormap/)), released under a
+    ([source](https://bids.github.io/colormap/)), released under a
    @m_class{m-label m-primary} **CC0** license
    ([choosealicense.com](https://choosealicense.com/licenses/cc0-1.0/)).
 */
@ -210,7 +210,7 @@ MAGNUM_DEBUGTOOLS_EXPORT Containers::StaticArrayView<256, const Vector3ub> plasm

@thirdparty Created by [Stéfan van der Walt](https://github.com/stefanv) and
    [Nathaniel Smith](https://github.com/njsmith) for the matplotlib library
-    ([source](http://bids.github.io/colormap/)), released under a
+    ([source](https://bids.github.io/colormap/)), released under a
    @m_class{m-label m-primary} **CC0** license
    ([choosealicense.com](https://choosealicense.com/licenses/cc0-1.0/)).
 */
@ -226,7 +226,7 @@ MAGNUM_DEBUGTOOLS_EXPORT Containers::StaticArrayView<256, const Vector3ub> infer

@thirdparty Created by [Stéfan van der Walt](https://github.com/stefanv) and
    [Nathaniel Smith](https://github.com/njsmith) for the matplotlib library
-    based on a design by Eric Firing ([source](http://bids.github.io/colormap/)),
+    based on a design by Eric Firing ([source](https://bids.github.io/colormap/)),
    released under a @m_class{m-label m-primary} **CC0** license
    ([choosealicense.com](https://choosealicense.com/licenses/cc0-1.0/)).
 */
--- a/src/Magnum/GL/Implementation/driverSpecific.cpp
+++ b/src/Magnum/GL/Implementation/driverSpecific.cpp
@ -626,7 +626,7 @@ auto Context::detectedDriver() -> DetectedDrivers {
        /* Otherwise try to detect a D3D ANGLE backend by querying line width.
           It's always exactly just 1 on D3D, usually (but not always) more on
           GL, not sure about Metal. So this is not a 100% match. Sources:
-           http://stackoverflow.com/a/20149090 and http://webglreport.com */
+           https://stackoverflow.com/a/20149090 and https://webglreport.com */
        else {
            Range1Di range;
            glGetIntegerv(GL_ALIASED_LINE_WIDTH_RANGE, range.data());
--- a/src/Magnum/Magnum.h
+++ b/src/Magnum/Magnum.h
@ -154,7 +154,7 @@ Defined if the engine is built for OpenGL ES 3.0 or OpenGL ES 2.0.
 Defined if the engine is built for WebGL (using Emscripten). WebGL 1 is nearly
 equivalent to OpenGL ES 2.0 and WebGL 2 to OpenGL ES 3.0, thus in most cases
 you don't need to treat it differently, but there are some specific
-restrictions and differences [compared to OpenGL ES 2.0](http://www.khronos.org/registry/webgl/specs/latest/1.0/#6)
+restrictions and differences [compared to OpenGL ES 2.0](https://registry.khronos.org/webgl/specs/latest/1.0/#6)
 and to [OpenGL ES 3.0](https://registry.khronos.org/webgl/specs/latest/2.0/#5)
 which you might want to be aware of. Implies also @ref MAGNUM_TARGET_GLES.
@see @ref MAGNUM_TARGET_GLES2 @ref CORRADE_TARGET_EMSCRIPTEN, @ref building, @ref cmake
--- a/src/Magnum/Math/Algorithms/GaussJordan.h
+++ b/src/Magnum/Math/Algorithms/GaussJordan.h
@ -52,7 +52,7 @@ backsubstitution is done only on @p t, as @p a would always end with identity
 matrix anyway.

 Based on an ultra-compact Python code by Jarno Elonen,
-http://elonen.iki.fi/code/misc-notes/python-gaussj/index.html.
+https://elonen.iki.fi/code/misc-notes/python-gaussj/.
 */
 template<std::size_t size, std::size_t rows, class T> bool gaussJordanInPlaceTransposed(RectangularMatrix<size, size, T>& a, RectangularMatrix<size, rows, T>& t) {
    for(std::size_t row = 0; row != size; ++row) {
--- a/src/Magnum/Math/Distance.h
+++ b/src/Magnum/Math/Distance.h
@ -126,7 +126,7 @@ defined by @f$ \boldsymbol{a} @f$ and @f$ \boldsymbol{b} @f$ using a
    d = \frac{|(\boldsymbol b - \boldsymbol a) \times (\boldsymbol a - \boldsymbol p)|}{|\boldsymbol b - \boldsymbol a|}
        = \frac{|(\boldsymbol b - \boldsymbol a)_\bot \cdot (\boldsymbol a - \boldsymbol p)|}{|\boldsymbol b - \boldsymbol a|}
@f]
-Source: http://mathworld.wolfram.com/Point-LineDistance2-Dimensional.html
+Source: https://mathworld.wolfram.com/Point-LineDistance2-Dimensional.html
@see @ref linePointSquared(const Vector2<T>&, const Vector2<T>&, const Vector2<T>&),
    @ref linePoint(const Vector3<T>&, const Vector3<T>&, const Vector3<T>&)
 */
@ -158,7 +158,7 @@ defined by @f$ \boldsymbol{a} @f$ and @f$ \boldsymbol{b} @f$ using a
@ref cross(const Vector3<T>&, const Vector3<T>&) "cross product": @f[
    d = \frac{|(\boldsymbol b - \boldsymbol a) \times (\boldsymbol a - \boldsymbol p)|}{|\boldsymbol b - \boldsymbol a|}
@f]
-Source: http://mathworld.wolfram.com/Point-LineDistance3-Dimensional.html
+Source: https://mathworld.wolfram.com/Point-LineDistance3-Dimensional.html
@see @ref linePointSquared(const Vector3<T>&, const Vector3<T>&, const Vector3<T>&),
    @ref linePoint(const Vector2<T>&, const Vector2<T>&, const Vector2<T>&)
 */
--- a/src/Magnum/Math/Intersection.h
+++ b/src/Magnum/Math/Intersection.h
@ -242,7 +242,7 @@ The purpose for this is to reduce the number of times you have to compute
 a ray inverse, when doing multiple ray / range intersections (for example
 when traversing an AABB tree). The algorithm implemented is a version of the
 classical slabs algorithm, see *Listing 1* in
-[Majercik et al.](http://jcgt.org/published/0007/03/04/).
+[Majercik et al.](https://jcgt.org/published/0007/03/04/).
@see @ref MeshTools::boundingRange()
 */
 template<class T> bool rayRange(const Vector3<T>& rayOrigin, const Vector3<T>& inverseRayDirection, const Range3D<T>& range);
--- a/src/Magnum/Math/Test/ColorTest.cpp
+++ b/src/Magnum/Math/Test/ColorTest.cpp
@ -1099,8 +1099,8 @@ void ColorTest::srgb8bitRoundtrip() {
 }

 void ColorTest::xyz() {
-    /* Verified using http://colormine.org/convert/rgb-to-xyz and
-       http://www.easyrgb.com/index.php?X=CALC. The results have slight
+    /* Verified using https://colormine.org/convert/rgb-to-xyz and
+       https://www.easyrgb.com/en/convert.php. The results have slight
       precision differences, because most of the code out there uses just the
       rounded matrices from Wikipedia which don't round-trip perfectly. I'm
       having Y in 0-1 instead of 0-100, thus the values are 100 times smaller. */
@ -1155,7 +1155,7 @@ void ColorTest::fromXyzDefaultAlpha() {
 }

 void ColorTest::xyY() {
-    /* Verified using http://www.easyrgb.com/index.php?X=CALC */
+    /* Verified using https://www.easyrgb.com/en/convert.php */
    Vector3 xyz{0.454279f, 0.413092f, 0.0607124f};
    Vector3 xyY{0.489481f, 0.445102f, 0.413092f};

--- a/src/Magnum/Math/TypeTraits.h
+++ b/src/Magnum/Math/TypeTraits.h
@ -377,7 +377,7 @@ template<class T> struct TypeTraits: Implementation::TypeTraitsDefault<T> {
     * the @ref epsilon() value), pure equality comparison everywhere else.
     * The @ref Half type has representable values sparse enough that no fuzzy
     * comparison needs to be done. Algorithm adapted from
-     * http://floating-point-gui.de/errors/comparison/.
+     * https://floating-point-gui.de/errors/comparison/.
     * @see @ref Math::equal(T, T), @ref Math::notEqual(T, T)
     */
    static bool equals(T a, T b);
--- a/src/Magnum/PixelFormat.h
+++ b/src/Magnum/PixelFormat.h
@ -701,7 +701,7 @@ enum class PixelFormat: UnsignedInt {

    /**
     * 24-bit unsigned normalized depth. Data layout consistent with the
-     * [KTX2 specification](http://github.khronos.org/KTX-Specification/#_depth_and_stencil_formats)
+     * [KTX2 specification](https://github.khronos.org/KTX-Specification/ktxspec.v2.html#_depth_and_stencil_formats)
     * --- aligned to 32 bits with the 8 most significant bits unused.
     *
     * Corresponds to @ref GL::PixelFormat::DepthComponent and
@ -742,7 +742,7 @@ enum class PixelFormat: UnsignedInt {

    /**
     * 16-bit unsigned normalized depth with 8-bit unsigned integral stencil.
-     * Data layout consistent with the [KTX2 specification](http://github.khronos.org/KTX-Specification/#_depth_and_stencil_formats)
+     * Data layout consistent with the [KTX2 specification](https://github.khronos.org/KTX-Specification/ktxspec.v2.html#_depth_and_stencil_formats)
     * --- aligned to 32 bits with depth in the 16 least significant bits and
     * the 8 most significant bits unused.
     *
@ -754,7 +754,7 @@ enum class PixelFormat: UnsignedInt {

    /**
     * 24-bit unsigned normalized depth with 8-bit unsigned integral stencil.
-     * Data layout consistent with the [KTX2 specification](http://github.khronos.org/KTX-Specification/#_depth_and_stencil_formats)
+     * Data layout consistent with the [KTX2 specification](https://github.khronos.org/KTX-Specification/ktxspec.v2.html#_depth_and_stencil_formats)
     * --- packed to 32 bits with depth in the 24 least significant bits
     * and stencil being in the 8 most significant bits.
     *
@ -771,7 +771,7 @@ enum class PixelFormat: UnsignedInt {

    /**
     * 32-bit float depth with 8-bit unsigned integral stencil. Data layout
-     * consistent with the [KTX2 specification](http://github.khronos.org/KTX-Specification/#_depth_and_stencil_formats)
+     * consistent with the [KTX2 specification](https://github.khronos.org/KTX-Specification/ktxspec.v2.html#_depth_and_stencil_formats)
     * --- packed to 64 bits with the depth in the 32 least significant
     * bits and the 24 most significant bits unused.
     *
--- a/src/Magnum/Platform/AndroidApplication.cpp
+++ b/src/Magnum/Platform/AndroidApplication.cpp
@ -466,7 +466,7 @@ std::int32_t AndroidApplication::inputEvent(android_app* state, AInputEvent* eve
                   there's no way to reliably know what concrete mouse / pen
                   button caused the event. */
                Pointer pointer;
-                /* http://www.graphics.stanford.edu/~seander/bithacks.html#DetermineIfPowerOf2 */
+                /* https://graphics.stanford.edu/~seander/bithacks.html#DetermineIfPowerOf2 */
                if(sourcePointers.second() && !(UnsignedByte(sourcePointers.second()) & (UnsignedByte(sourcePointers.second()) - 1)))
                    pointer = Pointer(UnsignedByte(sourcePointers.second()));
                else
--- a/src/Magnum/Platform/AndroidApplication.h
+++ b/src/Magnum/Platform/AndroidApplication.h
@ -356,7 +356,7 @@ class AndroidApplication {
         * @ref framebufferSize().
         *
         * @attention The reported value will be incorrect in case you use
-         *      the [Screen Compatibility Mode](http://www.androiddocs.com/guide/practices/screen-compat-mode.html).
+         *      the [Screen Compatibility Mode](https://developer.android.com/guide/topics/manifest/supports-screens-element#compat-mode)).
         *      See @ref platforms-android-apps-manifest-screen-compatibility-mode
         *      for details.
         */
--- a/src/Magnum/Platform/GlfwApplication.h
+++ b/src/Magnum/Platform/GlfwApplication.h
@ -67,9 +67,9 @@ namespace Implementation {

@m_keywords{Application}

-Application using the [GLFW](http://glfw.org) toolkit. Supports keyboard and
-mouse handling with support for changing cursor and mouse tracking and warping.
-Available on all platforms where GLFW is ported.
+Application using the [GLFW](https://www.glfw.org) toolkit. Supports keyboard
+and mouse handling with support for changing cursor and mouse tracking and
+warping. Available on all platforms where GLFW is ported.

@m_class{m-block m-success}

@ -100,9 +100,9 @@ See @ref cmake for more information.

@section Platform-GlfwApplication-usage General usage

-This application library depends on [GLFW](http://glfw.org) 3.2 and newer and
-is built if `MAGNUM_WITH_GLFWAPPLICATION` is enabled when building Magnum. To use
-this library with CMake, request the `GlfwApplication` component of the
+This application library depends on [GLFW](https://www.glfw.org) 3.2 and newer
+and is built if `MAGNUM_WITH_GLFWAPPLICATION` is enabled when building Magnum.
+To use this library with CMake, request the `GlfwApplication` component of the
 `Magnum` package and link to the `Magnum::GlfwApplication` target:

@code{.cmake}
--- a/src/Magnum/Platform/Implementation/DpiScaling.cpp
+++ b/src/Magnum/Platform/Implementation/DpiScaling.cpp
@ -82,27 +82,27 @@ Float x11DpiScaling() {
       won't be and that's okay -- it may be using Wayland or something else. */
    void* xlib = dlopen(nullptr, RTLD_NOW|RTLD_GLOBAL);
    Containers::ScopeGuard closeXlib{xlib, dlclose};
-    #ifdef CORRADE_TARGET_GCC /* http://www.mr-edd.co.uk/blog/supressing_gcc_warnings */
+    #ifdef CORRADE_TARGET_GCC /* https://web.archive.org/web/20160826013457/http://www.mr-edd.co.uk/blog/supressing_gcc_warnings */
    __extension__
    #endif
    auto xOpenDisplay = reinterpret_cast<Display*(*)(char*)>(dlsym(xlib, "XOpenDisplay"));
-    #ifdef CORRADE_TARGET_GCC /* http://www.mr-edd.co.uk/blog/supressing_gcc_warnings */
+    #ifdef CORRADE_TARGET_GCC /* see above */
    __extension__
    #endif
    auto xCloseDisplay = reinterpret_cast<int(*)(Display*)>(dlsym(xlib, "XCloseDisplay"));
-    #ifdef CORRADE_TARGET_GCC /* http://www.mr-edd.co.uk/blog/supressing_gcc_warnings */
+    #ifdef CORRADE_TARGET_GCC /* see above */
    __extension__
    #endif
    auto xResourceManagerString = reinterpret_cast<char*(*)(Display*)>(dlsym(xlib, "XResourceManagerString"));
-    #ifdef CORRADE_TARGET_GCC /* http://www.mr-edd.co.uk/blog/supressing_gcc_warnings */
+    #ifdef CORRADE_TARGET_GCC /* see above */
    __extension__
    #endif
    auto xrmGetStringDatabase = reinterpret_cast<XrmDatabase(*)(const char*)>(dlsym(xlib, "XrmGetStringDatabase"));
-    #ifdef CORRADE_TARGET_GCC /* http://www.mr-edd.co.uk/blog/supressing_gcc_warnings */
+    #ifdef CORRADE_TARGET_GCC /* see above */
    __extension__
    #endif
    auto xrmGetResource = reinterpret_cast<int(*)(XrmDatabase, const char*, const char*, char**, XrmValue*)>(dlsym(xlib, "XrmGetResource"));
-    #ifdef CORRADE_TARGET_GCC /* http://www.mr-edd.co.uk/blog/supressing_gcc_warnings */
+    #ifdef CORRADE_TARGET_GCC /* see above */
    __extension__
    #endif
    auto xrmDestroyDatabase = reinterpret_cast<void(*)(XrmDatabase)>(dlsym(xlib, "XrmDestroyDatabase"));
--- a/src/Magnum/Platform/Sdl2Application.h
+++ b/src/Magnum/Platform/Sdl2Application.h
@ -113,7 +113,7 @@ namespace Implementation {

@m_keywords{Application}

-Application using the [Simple DirectMedia Layer](http://www.libsdl.org/)
+Application using the [Simple DirectMedia Layer](https://www.libsdl.org)
 toolkit. Supports keyboard and mouse handling. This application library is
 available for all platforms for which SDL2 is ported except Android (thus is
 avaiable also on @ref CORRADE_TARGET_EMSCRIPTEN "Emscripten", see respective
@ -124,7 +124,7 @@ sections in @ref building-corrade-cross-emscripten "Corrade's" and

@thirdparty This plugin makes use of the [SDL2](https://www.libsdl.org/)
    library, released under the @m_class{m-label m-success} **zlib license**
-    ([license text](http://www.gzip.org/zlib/zlib_license.html),
+    ([license text](https://zlib.net/zlib_license.html),
    [choosealicense.com](https://choosealicense.com/licenses/zlib/)).
    Attribution is appreciated but not required.

@ -221,7 +221,7 @@ final package along with a PowerShell script for easy local installation.

@section Platform-Sdl2Application-usage General usage

-This application library depends on the [SDL2](http://www.libsdl.org) library
+This application library depends on the [SDL2](https://www.libsdl.org) library
 version 2.0.6 and newer. On Emscripten, the builtin minimal SDL implementation
 is used. The application library is built if `MAGNUM_WITH_SDL2APPLICATION` is
 enabled when building Magnum. To use this library with CMake, request the
--- a/src/Magnum/Platform/WindowlessWglApplication.cpp
+++ b/src/Magnum/Platform/WindowlessWglApplication.cpp
@ -122,7 +122,7 @@ WindowlessWglContext::WindowlessWglContext(const Configuration& configuration, G
    /* Get pointer to proper context creation function */
    typedef HGLRC(WINAPI*PFNWGLCREATECONTEXTATTRIBSARBPROC)(HDC, HGLRC, const int*);
    #ifdef CORRADE_TARGET_GCC
-    __extension__ /* http://web.archive.org/web/20160826013457/http://www.mr-edd.co.uk/blog/supressing_gcc_warnings */
+    __extension__ /* https://web.archive.org/web/20160826013457/http://www.mr-edd.co.uk/blog/supressing_gcc_warnings */
    #endif
    const PFNWGLCREATECONTEXTATTRIBSARBPROC wglCreateContextAttribsARB = reinterpret_cast<PFNWGLCREATECONTEXTATTRIBSARBPROC>( wglGetProcAddress(reinterpret_cast<LPCSTR>("wglCreateContextAttribsARB")));

--- a/src/Magnum/Primitives/Cube.cpp
+++ b/src/Magnum/Primitives/Cube.cpp
@ -592,7 +592,7 @@ constexpr struct VertexSolidStrip {
 } VerticesSolidStrip[]{
    /* Sources:
        https://twitter.com/Donzanoid/status/436843034966507520
-        http://www.asmcommunity.net/forums/topic/?id=6284#post-45209
+        https://www.asmcommunity.net/forums/topic/6284/#post-45209
        https://gist.github.com/cdwfs/2cab675b333632d940cf

        0---2---3---1
--- a/src/Magnum/SceneGraph/AbstractGroupedFeature.h
+++ b/src/Magnum/SceneGraph/AbstractGroupedFeature.h
@ -44,7 +44,7 @@ Used together with @ref FeatureGroup.

@section SceneGraph-AbstractGroupedFeature-subclassing Subclassing

-Usage is via subclassing the feature using [CRTP](http://en.wikipedia.org/wiki/Curiously_recurring_template_pattern)
+Usage is via subclassing the feature using [CRTP](https://en.wikipedia.org/wiki/Curiously_recurring_template_pattern)
 and @cpp typedef @ce'ing @ref FeatureGroup to accept only given type, e.g.:

@snippet SceneGraph.cpp AbstractGroupedFeature-subclassing
--- a/src/Magnum/Vk/CommandBuffer.h
+++ b/src/Magnum/Vk/CommandBuffer.h
@ -449,7 +449,7 @@ class MAGNUM_VK_EXPORT CommandBuffer {
         * @par
         *      Even though it may seem counterintuitive, it's recommended
         *      ([1](https://github.com/KhronosGroup/Vulkan-Docs/wiki/Synchronization-Examples#three-dispatches-first-dispatch-writes-to-one-storage-buffer-second-dispatch-writes-to-a-different-storage-buffer-third-dispatch-reads-both),
-         *      [2](http://themaister.net/blog/2019/08/14/yet-another-blog-explaining-vulkan-synchronization/))
+         *      [2](https://themaister.net/blog/2019/08/14/yet-another-blog-explaining-vulkan-synchronization/))
         *      to do global memory barriers than per-resource barriers, except
         *      for cases where layout transition or queue ownership transfer
         *      needs to be done on a particular image or buffer.
--- a/src/MagnumPlugins/AnyImageImporter/AnyImageImporter.cpp
+++ b/src/MagnumPlugins/AnyImageImporter/AnyImageImporter.cpp
@ -215,7 +215,7 @@ void AnyImageImporter::doOpenData(Containers::Array<char>&& data, DataFlags) {
    /* https://docs.microsoft.com/cs-cz/windows/desktop/direct3ddds/dx-graphics-dds-pguide */
    else if(dataString.hasPrefix("DDS "_s))
        plugin = "DdsImporter"_s;
-    /* http://www.openexr.com/openexrfilelayout.pdf */
+    /* https://openexr.com/en/latest/OpenEXRFileLayout.html#magic-number */
    else if(dataString.hasPrefix("\x76\x2f\x31\x01"_s))
        plugin = "OpenExrImporter"_s;
    /* https://en.wikipedia.org/wiki/Radiance_(software)#HDR_image_format and
@ -247,8 +247,8 @@ void AnyImageImporter::doOpenData(Containers::Array<char>&& data, DataFlags) {
    /* https://en.wikipedia.org/wiki/Portable_Network_Graphics#File_header */
    } else if(dataString.hasPrefix("\x89PNG\x0d\x0a\x1a\x0a"_s))
        plugin = "PngImporter"_s;
-    /* http://paulbourke.net/dataformats/tiff/,
-       http://paulbourke.net/dataformats/tiff/tiff_summary.pdf */
+    /* https://paulbourke.net/dataformats/tiff/,
+       https://paulbourke.net/dataformats/tiff/tiff_summary.pdf */
    else if(dataString.hasPrefix("II\x2a\x00"_s) ||
            dataString.hasPrefix("MM\x00\x2a"_s))
        plugin = "TiffImporter"_s;
--- a/src/MagnumPlugins/TgaImporter/TgaImporter.cpp
+++ b/src/MagnumPlugins/TgaImporter/TgaImporter.cpp
@ -96,7 +96,7 @@ Containers::Optional<ImageData2D> TgaImporter::doImage2D(UnsignedInt, UnsignedIn
        return {};
    }

-    /* RLE encoding. Reference: http://www.paulbourke.net/dataformats/tga/ */
+    /* RLE encoding. Reference: https://paulbourke.net/dataformats/tga/ */
    const bool rle = (header.imageType & 8);

    /* Color */
@ -201,7 +201,7 @@ Containers::Optional<ImageData2D> TgaImporter::doImage2D(UnsignedInt, UnsignedIn
    } else {
        Containers::ArrayView<char> dstPixels = data;
        while(!srcPixels.isEmpty()) {
-            /* Reference: http://www.paulbourke.net/dataformats/tga/ */
+            /* Reference: https://paulbourke.net/dataformats/tga/ */

            /* 8-bit RLE header. First bit denotes the operation, last 7 bits
               denotes operation count minus 1. */
--- a/src/dummy.cpp
+++ b/src/dummy.cpp
@ -28,4 +28,4 @@
   library target from OBJECT sources only and you have to provide at least one
   file. Otherwise the generated library gets replaced with self-pointing
   symlink and the build then obviously fails with "File not found" error.
-   Related: http://public.kitware.com/pipermail/cmake/2016-April/063178.html */
+   Related: https://cmake.org/pipermail/cmake/2016-April/063178.html */